Carrier transport and related phenomena in MOS devices

Silicon-based devices are currently the most attractive group because they are functioning at room temperature and can be easily integrated into conventional silicon microelectronics. There are many models and simulation programs available to compute CV curves with quantum correction [Choi C-H, Wu Y, Goo JS, Yu Z, Dutton RW. IEEE Trans on Electron Devi 2000; 47(10): 1843; Croci S, Plossu C, Burignat S. J Mater Sci Mater Electron 2003; 14: 311; Soliman L, Duval E, Benzohra M, Lheurette E, Ketata K, Ketata M. Mater Sci Semicond Process 2001; 4: 163]. This work deals with the simulation of electron transfer through SiO₂ barrier of metal–oxide–semiconductor structure (MOS). The carrier density is given by a self consistent resolution of Schrödinger and Poisson equations and then the MOS capacitance is deduced and compared with results available in literature. As it is well known, the MOS capacitance–voltage profiling provides a simple determination of structure parameters. The extracted tunnel oxide thickness and substrate doping are compared with those used in the simulation. For the purpose to investigate the electron tunnelling through the barrier, we have used the transfer matrix approach. Using I–V simulations, we have shown that the traps in SiO₂ matrix have a drastic influence on electron tunnelling through the barrier. The trap-assisted contribution to the tunnelling current is included in many models [Maserjian J, Zamani N. J Appl Phys 1982; 53(1): 559; Houssa M, Stesmans A, Heyns MM. Semicond Sci Technol 2001; 16: 427; Aziz A, Kassmi K, Kassmi Ka, Olivie F. Semicond Sci Technol 2004; 19: 877; Wu You-Lin, Lin Shi-Tin. IEEE Trans Dev Mater Reliab 2006; 6(1): 75; Larcher L. IEEE Trans Electron Dev 2003; 50(5): 1246]; this is the basis for the interpretation of stress induced leakage current (SILC) and breakdown events. Memory effect becomes typical for this structure. We have studied the I–V dependence with trap parameters.     

Performance of RC frames with hybrid reinforcement under reversed cyclic loading

The use of FRP as reinforcement in concrete structures has been growing rapidly. A potential application of FRP reinforcement is in reinforced concrete (RC) frames. However, due to FRP's predominantly elastic behaviour, FRP-RC members exhibit low ductility and energy dissipation. Hybrid steel-FRP reinforcement can be a viable solution to the lack of ductility of FRP-RC members. Using two layers of reinforcement in a section, FRP rebars can be placed in the outer layer and steel rebars in the inner layer away from the effects of carbonation and chloride intrusion. Combined with the use of FRP stirrups, this approach can enhance the corrosion resistance of RC members. However, current design standards and detailing criteria for FRP-RC structures do not provide detailed seismic provisions. In particular, the design and detailing of beam-column joints is a key issue in seismic design. During recent earthquakes, many structural collapses were initiated or caused by beam-column joint failures. Thus, research is needed to gain a better understanding of the behaviour of FRP and hybrid FRP-steel-RC under seismic loading. In this study, three full-scale beam-column joint specimens reinforced with steel, GFRP and a hybrid GFRP-steel configuration, respectively were tested in order to investigate their performance in the event of an earthquake.

---

Résumé L'utilisation de barres en polymères renforcés de fibres (PRF) comme armature dans les structures en béton est en train d'augmenter rapidement. Une application prometteuse des armatures en PRF est dans les structures en cadres de béton armé à multi-étages. Cependant, à cause de leur comportement élastique, les membres renforcés avec des armatures en PRF démontrent une ductilité limitée et une faible capacité de dissipation d'énergie. Les systèmes hybrides (combinaison d'armatures en acier et en polymères renforcés de fibres de verre (PRFV) se présentent comme une solution pratique pour remédier aux inconvénients des systèmes renforcés uniquement avec PRFV. En utilisant deux couches d'armatures, les barres en PRFV peuvent être placées à l'extérieur et ceux en acier à l'intérieur, loin des effets de la carbonatation et l'intrusion des ions chlores. En plus, l'utilisation des étriers en PRFV peut améliorer la durabilité de ces structures. Cependant, les normes de conception actuelles pour PRF n'offrent pas assez de détails sur les provisions sismiques, en particulaier sur la conception des joints de poutres-colonnes. De récents tremblements de terre ont démontré sans équivoque que les joints de poutres-colonnes sont critiques pour assurer l'intégrité structurale. Alors, il est important d'étudier le comportement de tels assemblages utilisant des armatures en PRFV ou des armatures hybrides (acier-PRFV). Dans cette étude, trois assemblages poutrecolonne en grandeur nature renforcés avec des armatures en acier, PRFV, et hybride (acier-PRFV) ont été construits et testés sous charges cycliques pour examiner leur comportement durant des tremblements de terre.

     

Use of FRP for RC Frames in Seismic Zones: Part II. Performance of Steel-Free GFRP-Reinforced Beam-Column Joints

The use of FRP as reinforcement in concrete structures has been growing rapidly due to its advantages over conventional steel reinforcement (e.g., corrosion resistance, light weight, magnetic neutrality). A potential application of FRP reinforcement is in structural concrete frames. However, current seismic design standards and detailing criteria for beam-column joints were established for steel reinforcement and may be unsuitable for FRP reinforcement due to its different mechanical properties. During recent earthquakes, many structural collapses were initiated or caused by beam-column joint failures. Since there are no detailed specifications for the application of FRP reinforcement in seismic zones, research is needed to gain a better understanding of the behaviour of FRP-reinforced concrete under seismic loading. In this study, two full-scale beam-column joint specimens reinforced with steel and GFRP, respectively, were tested in order to investigate their performance in the event of an earthquake. The control steel-reinforced specimen is detailed according to the Canadian Code (CSA A23.3-94) recommendations. The GFRP-reinforced specimen is detailed in a similar scheme but using a GFRP grid. The behaviour of the two specimens under reversed cyclic loading, their load-storey drift envelope relationship and energy dissipation ability were compared. The GFRP-reinforced specimen showed a predominantly elastic behaviour up to failure. While its energy dissipation was low, its performance was acceptable in terms of total storey drift demand.     

Hybrid clustering analysis using improved krill herd algorithm

In this paper, a novel text clustering method, improved krill herd algorithm with a hybrid function, called MMKHA, is proposed as an efficient clustering way to obtain promising and precise results in this domain. Krill herd is a new swarm-based optimization algorithm that imitates the behavior of a group of live krill. The potential of this algorithm is high because it performs better than other optimization methods; it balances the process of exploration and exploitation by complementing the strength of local nearby searching and global wide-range searching. Text clustering is the process of grouping significant amounts of text documents into coherent clusters in which documents in the same cluster are relevant. For the purpose of the experiments, six versions are thoroughly investigated to determine the best version for solving the text clustering. Eight benchmark text datasets are used for the evaluation process available at the Laboratory of Computational Intelligence (LABIC). Seven evaluation measures are utilized to validate the proposed algorithms, namely, ASDC, accuracy, precision, recall, F-measure, purity, and entropy. The proposed algorithms are compared with the other successful algorithms published in the literature. The results proved that the proposed improved krill herd algorithm with hybrid function achieved almost all the best results for all datasets in comparison with the other comparative algorithms.     

Oxy‐fuel combustion technology: current status,applications, and trends

The increased level of emissions of carbon dioxide into the atmosphere due to burning of fossil fuels represents one of the main barriers toward the reduction of greenhouse gases and the control of global warming. In the last decades, the use of renewable and clean sources of energies such as solar and wind energies has been increased extensively. However, due to the tremendously increasing world energy demand, fossil fuels would continue in use for decades which necessitates the integration of carbon capture technologies (CCTs) in power plants. These technologies include oxycombustion, pre‐combustion, and post‐combustion carbon capture. Oxycombustion technology is one of the most promising carbon capture technologies as it can be applied with slight modifications to existing power plants or to new power plants. In this technology, fuel is burned using an oxidizer mixture of pure oxygen plus recycled exhaust gases (consists mainly of CO₂). The oxycombustion process results in highly CO₂‐concentrated exhaust gases, which facilitates the capture process of CO₂ after H₂O condensation. The captured CO₂ can be used for industrial applications or can be sequestrated. The current work reviews the current status of oxycombustion technology and its applications in existing conventional combustion systems (including gas turbines and boilers) and novel oxygen transport reactors (OTRs). The review starts with an introduction to the available CCTs with emphasis on their different applications and limitations of use, followed by a review on oxycombustion applications in different combustion systems utilizing gaseous, liquid, and coal fuels. The current status and technology readiness level of oxycombustion technology is discussed. The novel application of oxycombustion technology in OTRs is analyzed in some details. The analyses of OTRs include oxygen permeation technique, fabrication of oxygen transport membranes (OTMs), calculation of oxygen permeation flux, and coupling between oxygen separation and oxycombustion of fuel within the same unit called OTR. The oxycombustion process inside OTR is analyzed considering coal and gaseous fuels. The future trends of oxycombustion technology are itemized and discussed in details in the present study including: (i) ITMs for syngas production; (ii) combustion utilizing liquid fuels in OTRs; (iii) oxy‐combustion integrated power plants and (iv) third generation technologies for CO₂ capture. Techno‐economic analysis of oxycombustion integrated systems is also discussed trying to assess the future prospects of this technology. Copyright © 2017 John Wiley & Sons, Ltd.     

Opportunities for plant-derived enhancers for iron,zinc, and calcium bioavailability: A review

Understanding of the mechanism of interactions between dietary elements, their salts, and complexing/binding ligands is vital to manage both deficiency and toxicity associated with essential element bioavailability. Numerous mineral ligands are found in both animal and plant foods and are known to exert bioactivity via element chelation resulting in modulation of antioxidant capacity or micobiome metabolism among other physiological outcomes. However, little is explored in the context of dietary mineral ligands and element bioavailability enhancement, particularly with respect to ligands from plant-derived food sources. This review highlights a novel perspective to consider various plant macro/micronutrients as prospective bioavailability enhancing ligands of three essential elements (Fe, Zn, and Ca). We also delineate the molecular mechanisms of the ligand-binding interactions underlying mineral bioaccessibility at the luminal level. We conclude that despite current understandings of some of the structure–activity relationships associated with strong mineral–ligand binding, the physiological links between ligands as element carriers and uptake at targeted sites throughout the gastrointestinal (GI) tract still require more research. The binding behavior of potential ligands in the human diet should be further elucidated and validated using pharmacokinetic approaches and GI models.     

Investigating the effect of production process of ball mill refiner on some physical quality parameters of compound chocolate: response surface methodology approach

Chocolate compound was produced using ball mill refiner, and the effect of agitator shaft speed and refining time on the physical quality parameters (particle size, colour and steady‐state rheology) of compound chocolate was determined using response surface methodology. The shaft speed and refining time range were selected between 40–60 r.p.m. and 10–30 min, respectively. Determination coefficient of the models established for particle size, Newtonian viscosity and colour parameters (brightness, chroma and hue angle) were found to be very close to unity. Increasing shaft speed and time induced a reduction in particle size and an increase in viscosity of the samples. Temperature sweep test was also performed, and the obtained data were successfully fitted to Arrhenius equation to calculate the corresponding parameters representing temperature dependency of the compounds. The results highlighted that the establishment of such models can provide essential information in terms of optimisation of production processes regarding usage purpose of the compound chocolate.     

An E-Business Event Stream Mechanism for Improving User Tracing Processes

With the rapid development in business transactions, especially in recent years, it has become necessary to develop different mechanisms to trace business user records in web server log in an efficient way. Online business transactions have increased, especially when the user or customer cannot obtain the required service. For example, with the spread of the epidemic Coronavirus (COVID-19) throughout the world, there is a dire need to rely more on online business processes. In order to improve the efficiency and performance of E-business structure, a web server log must be well utilized to have the ability to trace and record infinite user transactions. This paper proposes an event stream mechanism based on formula patterns to enhance business processes and record all user activities in a structured log file. Each user activity is recorded with a set of tracing parameters that can predict the behavior of the user in business operations. The experimental results are conducted by applying clustering-based classification algorithms on two different datasets; namely, Online Shoppers Purchasing Intention and Instacart Market Basket Analysis. The clustering process is used to group related objects into the same cluster, then the classification process measures the predicted classes of clustered objects. The experimental results record provable accuracy in predicting user preferences on both datasets.     

Development of blown film linear low-density polyethylene–clay nanocomposites: Part A: Manufacturing process and morphology

In this study, linear low-density polyethylene (LLDPE)/clay nanocomposites with different clay contents were prepared by melt intercalation using two different compatibilizers: maleic anhydride grafted styrene–ethylene–butylene–styrene and maleic anhydride grafted polyethylene (PE-g-MA). Melt intercalation was achieved by twin extrusion and nanocomposite films were produced by blown film extrusion. Effects of clay and compatibilizer fractions and type of compatibilizer on the structure, permeability, and the barrier properties of the nanocomposite films were investigated. PE-g-MA was shown to notably improve the dispersion of clay layers in the polyethylene matrix, and this was examined by atomic force microscopy and X-ray diffraction. The latter tests have also highlighted the importance of the screw configuration: the presence of mixing elements favors the dispersion and distribution of nanoclay. Moreover, differential scanning calorimetry results have shown no significant effect of the clay on the crystallinity of the composite while thermogravimetric analysis tests have demonstrated a decrease of onset and peak of decomposition temperatures. Finally, barrier properties toward water vapor transmission were measured. It was proven that not also clay, but the compatibilizer participated in decreasing the permeability of the film. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48589.